Soaring night light

This is my first master class in which I will show how to make a beautiful night light with the effect of floating in the air. This lamp is very easy to assemble and does not contain expensive or scarce materials. A beautiful night light will perfectly decorate your bedroom or children's room, fill it with a little magic and coziness.
Soaring night light

Materials and tools

Tool:
  • Jigsaw or wood hacksaw
  • A drill or a screwdriver with drills.
  • A pistol with hot glue.
  • A glue on wood.
  • Brush and white paint on wood.
  • Sandpaper.
  • Scissors.
Materials:
  • A wooden rack is 1.5 x 1.5 cm long with a total length of about 210 cm.
  • Wooden Rack 3 x 3 cm. total length approximately 60 cm.
  • LED or fluorescent lamp, with cartridge.
  • Power cord with plug and switch.
  • li>
  • White paper 4.
  • Color transparent plastic - you can take out a plastic folder for documents. This can be bought at any store that sells stationery.
Here are the folders,from which you can make excellent color filters for the lamp.
Floating night light

Making a floating night light

So, you need to carefully drink the following pieces of wooden slats:
  • 1.5 x 1.5 cm x 13 cm - 8 pieces.
  • 1.5 x 1.5 cm x 25 cm - 3 pieces.
  • 1.5 x 1.5 cm x 23 cm - 1 piece.
  • 3 x 3 cm x 12 cm - 4 pieces.
Floating night light
We glue two lengths of 25 cm with two lengths of 13 cm. Hold the structure for 3-5 minutes until the glue securely grabs the pieces. To accelerate, you can use a hairdryer.
Floating night light
Next, we glue the segments 23 cm and 25 cm long with two 13 cm pieces.
Floating night light
Then we glue the four parts 12 cm together. This will be the base of the nightlight.
soaring night light
We glue the frames together by four 13 cm pieces. It should make a kind of cube with two high sides.
Floating night light
It is advisable to load the entire structure with a clampor weights and leave to dry for 24 hours.
Floating night light
Drilling a hole for the power wire.
Soaring night light
We clean out all irregularities and burrs with fine-grained sandpaper. soaring night light
Mark up the stand on which we will glue the cube. Here is the whole focus of the design: the main part will be shifted relative to the stand. And when the lamp shines, a small base will be almost imperceptible, as a result an interesting effect is created that the lamp hangs in the air, at some distance from the plane.

Related News


Paper-nosed Bookmarks
Obagrant Charm Doll
How to get a loan in Perm
Paper T1 Cunningham Tank Model
Spacious Apartment in Beijing