Cloth Lizard

This suspension, 15 cm long, is made in the style of a coffee toy. lizard made of cloth
For manufacturing we take such materials: - white fabric" Calico ". - scissors. - acrylic paints. - thin brushes. - glue PVA. coffee. - a piece of foam. - thin cord. - gel - any needle for the toys. Before the work we draw the pattern of the lizard, the length which is 16 cm and sh Rin 8.5 cm. We plan the shape and location of the eye of the toy. lizard made of cloth According to the cut out pattern, we outline the main contour of the lizard on a cloth folded in half with a simple pencil. We fasten the sewing pin and cut it out with the allowances on the seams.
 lizard made of cloth
Now, on one side between the paws, we mark the place for filling, which will not be stitched. And on the main office we make a line with small stitches. After all zastrochili, in complex turns make scissors cutting, not reaching the seam.And now it will be possible to turn it out starting from the tip of the tail.
 fabric lizard
We put the pattern under the fabric and mark the shape of the eye with a pencil against the light.
 lizard from the fabric
The next step in making a toy will be its filling. We take any filler (sintepukh, sintepon, holofiber) and we seal the toy well through the hole left.
 lizard made of cloth
When this process is completed, carefully sew a thread with a needle and thread, left the incision.br>
fabric lizard
Next, to decorate all the legs in turn, we make the utyazhki thread. On each paw there are two bends and we will pull them together with a thread. We pierce with a needle and thread first in the first bend, departing from the edge of 3 -4 mm. We make several stitches in one place, we direct the thread over the fold of the fabric and tighten them. Then we go to the second fold and also form the weft. On each foot are obtained three fingers.
 fabric lizard
But we have 4 legs,form everything.
fabric lizard
Now let's go to the muzzle. Also with a needle and thread tighten the nose. On the top of the muzzle, in the upper corner we retreat 5 mm from the edge and make a puncture 1 cm long. In this case, the thread passes inside the toy, we make several stitches in one place and we do not tighten very tightly, we get a nose shape with nostrils.
fabric lizard
And on the edge of the tail we make a loop from the thread, which we will use when tinting. lizard made of cloth In so now we will prepare a coffee solution. In a jar we pour 1 teaspoon of instant coffee, pour 3 tablespoons of boiling water, stir well and let cool slightly. Then add the PVA glue to the warm solution, keeping the proportions 1/1 and mix thoroughly. With this solution, we paint the lizard from all sides and hang it for 4-5 hours for the finished loop.
 lizard made of cloth
The dried toy changed color and became denser. On her pencil draw the eye, and then circle them with a gel pen.Also put points on the fingers.
 fabric lizard
Now let's start painting with acrylic paints. Make a mixture of brown and yellow. We take a piece of foam rubber and with a paint pass through all the seams with light movements. Then on the legs, head, nose.
 fabric lizard
After this layer dries out, draw the eyes. In the narrow part will be black, then a strip of blue and a little white on top. Give time to dry. And then we put a white highlight on the pupil.
 fabric lizard
Now, again with a gel pen, we correct the contours of the eyes and draw the cilia.
 fabric lizard
We are all dry and can cut a thread from the tail, but in its place fasten a beautiful cord. Suspension-lizard ready. Eyes can be covered with clear nail polish.
 fabric lizard
Good luck to all.

Related News


From cold porcelain
Oatmeal Fritters
About Okushi from Rice Porridge Recipes from Gosha
Child development calendar up to 1 year old
Author's Paper
French Lemon Tart