Drill a stainless steel pot
If you have ever encountered drilling stainless steel, then you know perfectly well that it is quite problematic to drill this metal. It is necessary to have some knowledge and experience, because unlike ordinary steel, stainless is much harder to machine, which leads to certain difficulties. I'll show you how to make three large diameter holes in a stainless steel pan in three different ways. The task is simplified by the fact that the pan has walls made of thin metal.Three ways that I will use:
Drilling a stainless steel with your own handsSo, we decide where to make a hole. To ensure that the drill does not jump when entering, the core core of the future hole is.
- Drilling with a step drill.
- Crown drilling.
- And drilling with a conventional drill,with an argument to the desired diameter using Dremel.
We drill stainless steel with a step drillWe recommend drilling at low speeds with lubricant, in the role of which use oil well. And if you don’t have it at hand, you can periodically sprinkle the drilling site with plain water.
Drilling a stainless steel with a coronary drillNow it’s time for the crown. Again, the center of the core, a drill bit drill a hole under the entrance bit drill bit. And already with a coronary drill, we begin to drill a wide hole, not forgetting to spray a cooling-lubricating fluid.
Bathroom furniture choice
Natural Air Freshener
The subtleties of festive decor
Tunic with short sleeves