Electronic shredder

Imagine that you have some kind of device that can disable any electronics at a distance. Agree, like the script of some fantastic movie. But this is not a fantasy, but quite a reality. Such a device can be made by almost anyone who wants to do it himself, from parts that can be freely obtained.
Electronics shredder - electromagnetic gun

Device Description

Electronics shredder is an electromagnetic gun that sends powerful high-amplitude directional electromagnetic pulses that can destroy microprocessor technology.

The principle of operation of the killer

The principle of operation vaguely resembles the operation of a Tesla transformer and a stun gun. An electronic high-voltage boost converter is powered from the battery. The load of the high-voltage converter is a series circuit of a coil and a spark gap.As soon as the voltage reaches the level of the punching of the spark gap, a discharge occurs. This discharge makes it possible to transfer all the energy of a high-voltage pulse to a wire coil. This coil converts a high voltage pulse into a high amplitude electromagnetic pulse. The cycle repeats several hundred times per second and depends on the frequency of the converter.

Instrument Circuit

One switch will be used as a spark gap - it will not need to be pressed. And another for switching.
Electronics shredder - electromagnetic gun

What you need to build?

- 3.7 V batteries - aliexpress - Case - aliexpress - High voltage converter - aliexpress - Two switches - aliexpress - Super glue. - Hot glue.
Electronics shredder - electromagnetic gunElectronics shredder - electromagnetic gunElectronics shredder - electromagnetic gunElectronics shredder is an electromagnetic gunElectronics shredder - electromagnetic gunElectronics shredder - electromagnetic gunElectronics shredder - electromagnetic gun

Assembly

Take the case and drill the holes for the switches. One from the bottom, the other from the top. Now make the coil. Winding around the perimeter of the case. We fix the coils with hot glue. Each turn is separated from each other. The coil consists of 5 turns. We collect everything according to the scheme, solder the elements. We insert an insulating gasket between the contacts of the high-voltage switch so that the spark is inside, not outside. We fix all the parts inside the case, close the case cover.
Electronics shredder - electromagnetic gunElectronics shredder - electromagnetic gunElectronics shredder - electromagnetic gunElectronics shredder - electromagnetic gun

Safety requirements

Be especially careful - very high voltage! Allmanipulate the circuit only after disconnecting the power source. Do not use this electromagnetic shredder near medical equipment or other equipment that human life may depend on.

The result of the magnetic gun


The gun famously knocks almost all the chips, of course there are exceptions. If you have unnecessary electronic devices you can check the work on them. The electronics shredder has a very small size and easily fits in your pocket. Check on an oscilloscope. Holding probes at a distance and not connecting, the oscilloscope just rolls over.


Related News


How to iron a shirt
Hairpin with flower
Paper Roses Heart
What is a crankcase
Do-it-yourself mounting sockets
Baked Apple Homemade Marshmallow
Poplar
Bathroom furniture choice