Flower Bow Headband

For the manufacture of the rim "Flower Bow" you will need: - a narrow ribbon of light lilac color. - a plastic bezel 1.3 cm wide. - scissors. - pink-colored rhinestones with a diameter of 4 mm . - lighter. - wide pink ribbon made of satin. - ribbon made of satin fuchsia of medium size width. - lilac felt. - glue gun. - piece Decorative braid, imitating silvery rhinestones. Sequence of work. First you need to process the bezel.
Bezel Flower Bow Masterclass
On its flat surface, the future bow will not hold well, it will require a narrow ribbon.
Bezel Flower Bow Master class
The edge of the light lilac ribbon needs to be singed so that it does not crumble while the rim is worn. Then this narrow tape should wrap the bezel, not forgetting to make uniform distances between each turn.It is not necessary to make frequent entanglements of the rim, the main thing is to cover the main part of the rim surface. Glue should be spread evenly and along the entire line of contact between the tape and the rim. It is important to ensure that the glue surplus does not protrude beyond the limit of the tape.
 Bezel Flower Bowt Master-class
Temporarily you can remove the bezel so that it does not interfere, and proceed to create a floral bow. For this you need a wide ribbon, from which you need to prepare squares with sides of 50 mm. A total of such blanks for the rim will require 24 pieces.
 Headband Flower Bow Master Class
You need to make three-dimensional parts from each square. Taking up one blank, you need to bend it, focusing on the diagonal line, to make a triangle.
 Bezel Flower Bow Master Class
The resulting blank need to be folded now in half, and repeat the action twice more. The result is a triangular part,bent in four layers.
 Bezel Flower Bow Masterclass
Having arranged the cuts to the bottom, you need to cut them with scissors, correcting possible irregularities and immediately singe with fire, to solder together. It is important to do this carefully so that the tape does not burn down and does not become covered with black opalines, but each layer of the fabric must be processed.
 Bezel Flower Bow Master Class
At the place of singing a strong seam was formed. The whole petal at this place must be turned.
 Bezel Flower Bow Master Class
The volume petal is ready, it remains to make the same from other pink squares.
 Bezel Flower bow Masterclass
Now for each petal you need to make a leaf. For this you need a fuchsia ribbon of average width. From it should be prepared segments of 4.5 cm. Their total number should correspond topetals.
 Headband Flower Bow Masterclass
All the leaves should also be created separately. Taking the first segment in hand, you need to place it face up.
 Bezel Floral Bow Master Class
Then fold the entire length in half, combining the edges, and hiding the inside of the wrong side.
 Bezel Flower Bow Master Class
Squeezing the fold line with your fingers, you need to cut off the top corner under the small a little tilt. At the same time the fold should remain unchanged.
 Bezel Flower Bow Master Class
Oblique cut you need to sing, while soldering tape folding together.
Bezel Flower Bow Master class
You can straighten the workpiece, the petal is almost ready.
Flower Bezelbow Master class
From other segments you need to make similar leaves.
Bezel Flower Bowt Master-class
Next, the petals and leaves must be aligned. The bottom of the petal should be smeared with glue and attached to the pointed part of the leaf, retreating 2-3 mm.
Bezel Flower Bowt Masterclass
The bottom cut of the leaf requires a petal to wrap on both sides.
 Bezel Flower Bowt Master-class
Holding in this position, the cut must be processed by fire, soldering.  Bezel Flower Bowt Master-class
This action must be repeated with all the leaves and petals by combining them.  Headband Flower Bow Masterclass Now you can start collecting a bow. To create the first row you need to glue together two petals,combining their side parts.  Headband Flower Bow Masterclass In the second row you need to place the details on the bottom side of the first level. Three petals should be glued between the parts of the first row.
 Headband Flower Bow Master Class
Then you need to fix the two petals in the center.
Bezel Flower Bow Master class
And one more detail to glue on the edges, as shown in the photo.
 Headband Flower Bow Master Class
This is how the first half of the bow came about. Repeating all actions, you need to make a similar half.
 Bezel Flower Bow Master Class
With the bow halves attached to the felt, you need to cut the base of the felt. It should be in the form of a pyramid.  Bezel Flower Bow Master Class These details will require 2 pieces of the same size.They should be glued to the wrong side of the halves of the bow. These bases will close the intersection points of the petals and make it easier to attach the bow to the rim.
 Bezel Floral Bow Master Class
Now you need to attach the remaining two petals at the very beginning of the halves bow, giving them a neat and complete look. Both parts are ready, you can start to fasten the bow to the rim.
 Bezel Flower Bowt Master-class
Stepping back from the edge of the rim 8 cm, you need to glue the first piece of the bow, putting a bottleneck up.
 Bezel Flower Bowt Masterclass
Then, attach the second part of the bow, docking their narrow edges together. It is important to ensure that the bezel fits snugly against the Bantu.
 Bezel Flower Bowt Master-class
The middle of the bow should be wrapped in a light purple ribbon to cover the seams of the petals .
Headband Floral Bow Masterclass
Gentle on decorative tape imitating silver crystals along the middle of the narrow ribbon.
Bezel Flower Bow Master Class
It remains to supplement the bow with a few pink rhinestones.
 Headband Flower Bow Master Class
Headband" Flower Ban "I am ready!

Related News


Pink Eight
Patchy Christmas Ball
Seafood in coconut milk
Free energy in your home
The subtleties of festive decor
A large table of plastic pipes