Hairpin of jellyfish from satin ribbons

I propose to make a hairpin from satin ribbons that resembles a sea jellyfish in appearance. Such a beautiful bow will decorate a girl's hairstyle, it can be worn in kindergarten, school or used as an element of a costume at a matinee. The bow is made easy, although you have to work a little, because you will need to make many elements for a hairpin. To make a hair clip, you need:
  • a narrow ribbon made of satin with a width of 6 mm
  • tweezers;
  • silicone adhesive;
  • candle;
  • / li>
  • foil;
  • wooden sticks with a diameter of 4 mm.
 Jellyfish hairpin from satin ribbons
The hairpin is assembled from two main parts - it is a fuzz of short lengths of tape and long spiral. 1. So, we take ribbons from satin, I use two shades of similar color. Cut them into 6 cm pieces. Pin of the jellyfish from satin ribbons
 Medusa hairpin from satin ribbons
For one hairpin you will need about 60 pieces of ribbon . 2. I also need long lengths of tape, the length of which is 26 cm. I use 10 pieces of such lengths for one hairpin.
 Jellyfish pin made of satin ribbons
In general, For one barrette, you need to prepare approximately 6.5 m of tape. 3. Now we produce spiral bands. For this we need wooden sticks.
 Jellyfish clip from satin ribbons
Wrap long pieces of tape on sticks and fix them in pieces at the edges so that the tape does not break up . Wrap the sticks in foil and place in the oven for 10 minutes. After the time has elapsed, wait until the foil cools down so as not to burn yourself and carefully remove the ribbons from the sticks. We get beautiful spirals. 4. We make loops from 6 cm lengths of tape.Connect the edges together, hold with tweezers and fasten over the fire. Do the same with all segments.
 Hairpin of jellyfish from satin ribbons
Assembling hair clips 5. On the basis of a felt with a diameter of 4 cm around the circle, we tightly glue 14 loops.  Hairpin of jellyfish from satin ribbons 6. Gradually fill the loop with the loop with the loop, sticking them as close as possible to each other. In total, I stuck 6 rows.  Hairpin of jellyfish from satin ribbons  Medusa hairpin from satin ribbons 7. When a very small hole remains in the middle, we glue 5 eyelets together and glue it in the middle.
 Hairpin of jellyfish from satin ribbons
 Jellyfish pin made from satin ribbons
8. We turn the workpiece over and glue another row of eyelets in a circle, glue spirals on one side,folding them in half.
 Jellyfish hairpin from satin ribbons
9. From above we glue another felt circle with a clip between the circles.
 Jellyfish made from satin ribbons
Jellyfish hairpin from satin ribbons
Hairpin is ready.
 Jellyfish clip from satin ribbons


Related News


Paper Tulips
Strawberry Jam
What to give Capricorn
White Dahlia Hair Tie
Fitness for men