How to upgrade the processor in 2018

Find out which types of processors your motherboard supports and purchase a processor from this list. When buying a processor, do not choose the latest models - as a rule, their price is greatly overestimated. Get a tube of heat transfer paste.
Disconnect the computer from the network. Remove both side covers from the system unit by unscrewing the screws that secure them. Disconnect the cooler connector from the system board. If you see that some cables will interfere with the work, disconnect them, having previously memorized or sketched their original position.
Now you need to remove fromprocessor�radiator with cooler attached to it. The radiator is fastened with plastic snaps, their design may differ on different motherboards. In some cases, to remove the radiator, it is necessary to squeeze the ends of the latches on the back side of the board and push them out of the holes.
When removing the radiator, do not exert any effort - perhaps it simply stuck to the processor on the dried thermally conductive paste.Without connecting the cooler connector, turn on the computer for a couple of minutes. The processor heats up, and after the computer is disconnected from the network, the radiator is easily removed from it.
Lay the system unit on its side. To release the processor, you need to raise the lever next to it, it may take some effort. After that, you can easily remove the chip from the socket. Put a new processor in its place, no effort can be made during installation. The processor must accurately enter the socket and be positioned exactly flat. After ensuring that it is properly positioned, press it again with the lever. This may require some considerable effort.
Inspect the radiator, clean it from dust and traces of old heat-conducting paste. Apply to the center of the case.processor�A drop of thermal paste the size of a small pea. Carefully place the radiator, lightly push it to the side and firmly press down until the latches lock. There are other options for applying thermal paste - for example, a few small drops. Sometimes a grease, like a trowel, is spread over the surface of the body.processor�plastic card.
The processor and radiator are installed, all you have to do is plug in all the connectors, close the side panels of the case and turn on the computer. You may have to put in the BIOS necessary for thisprocessor�settings so that it works at the desired frequency.

Related News

How to draw a monkey
What books give
Honey Ginger Cake
Festive Strawberry Cake
How to make a raincoat