Luxury Vintage Card
If you or your family do needlework, then you probably have a lot of beautiful shreds and scraps that can be used to create a very nice and simple postcard in vintage style. And the creation of this little gift beauty you will not take much time - you can collect such a card in less than an hour. For a postcard you need: a piece of white or gray cardboard for the basis of a postcard measuring 27x20.5 cm, br>- a piece of solid color cardboard for the front of the postcard measuring 20.5x13.5 cm, in this case, a plain cardboard with a metallic effect was used; - a decorative detail measuring 16x7 cm; in the production of this card, a motif was cut from a piece of ordinary wall-paper, but you can use Call any favorite picture from a cover of a notebook or a magazine, it is desirable that the picture was made of thick paper or cardboard; - gipyurnoy lace tape segment with scalloped edge about 10 cm long and 3 cm in width; - organza patches, in extreme cases, if there is no organza,you can replace it with artificial chiffon; - satin ribbon about 0.75 cm wide and about 60 cm long; - 3 beads, beads or pearls for the middles of flowers. In addition, you will need additional materials:Now we decorate the card with romantic and delicate floral elements. From the satin ribbon we twist the roses. We try to make them as flat as possible. You do not need to make them too big and bulky, there will be enough roses with 2-3 rows of ribbon. The maximum diameter of the flower is not more than 1.5 cm. We sew the roses from the wrong side so that the thread does not “climb” onto the front side of the flower. Then we draw the thread in the middle and sew a bead. We take the thread back inside out and fasten it. Just tedious to make three flowers. Although, of course, you can make 5 or even more flower motifs at will.
- needle with thread in the color of satin ribbons; - stationery or construction double-sided tape 1 cm wide; - scissors; - pencil and ruler to cut cardboard parts; - matches and a candle for singing organza slices.Also, besides all the above, you, of course, can not do without skillful pens, fresh portions inspiration and unstoppable imagination, because it is unlikely that it will be possible to repeat exactly the hand-made thing, and you will have to create your own masterpiece! So, for the beginning we are working with a small motif, which in this case was cut out of dense wallpaper. The right edge is decorated with a scalloped border. To do this, simply glue a strip of double-sided tape on the front side of the motive,and then put a guipure tape on the adhesive strip so that the festoons look beyond the edge of the motive and subsequently overlap the background.Gently press the braid so that it is well fixed, and turn over the decorative element. We trim the excess braid and unnecessary festoons, leaving 1.5 cm allowances on each side. We glue them with pieces of double-sided tape on the wrong side of the wallpaper motive.Now our little goth motive s. Glue it on a piece of colored cardboard, which will be the front part of the postcard. For this we use double-sided tape. Especially gently sticking the side where the guipure is located.The front side of the postcard is almost ready.
- needle with thread in the color of satin ribbons; - stationery or construction double-sided tape 1 cm wide; - scissors; - pencil and ruler to cut cardboard parts; - matches and a candle for singing organza slices.
>img src="https://sdelaysam-svoimirukami.ru/images/20/100-roskoshnaya-vintazhnaya-otkrytka.jpg" alt="Luxury Vintage Card" title="Luxury Vintage Card">
How to make an owl from plasticine
Cardboard Roll Snowman
Relax with minimal cost in an expensive city