Making a bonbonniere

It often happens that there is no place to put various trinkets. You have to pack everything in bags or put everything in one place, where you will not find anything. And how wonderful it is that we have our hands and our imagination to make useful things on our own. Here such a nice bonbonniere can serve for storing various small things, and possibly candy (in French, this is exactly what it is for) .
 Making a bonbonniere
Starting a master class, decide which color scheme you would like to make a bonbonniere. Prepare the materials and then proceed, following all instructions. For work we will need: a cutting mat or any hard surface that you can’t ruin, PVA glue, glue brush, clerical knife, pencil, metal ruler, eraser, glue " Moment Crystal ", masking tape, drawing paper, binding paper (2 mm thick), 100% cotton, synthetic winterizer. You will also need a stack and a spatula. In this case, the stack is plastic, but you can have wood or metal.When doing this work, you can get by with just a stack, but the spatula helps a lot to do everything quickly and accurately.
 tools
Next, you need to make blanks from binderboard with certain sizes. You can make the size of the bonbonniere at your discretion. The main thing to consider when calculating the thickness of the cardboard.
 Making a bonbonniere
Mode with a stationery knife, firmly pressing the metal ruler to the cardboard at the cut point. we cut off
With the help of “Moment Crystal” glue we glue the parts of the walls to the bottom of the bonbonniere from the side.
 glue
Prikl Eiv two walls measuring 10x5 cm, fix them with masking tape.
 we glue
We glue the remaining walls, after which we fix all the joints with adhesive tape.
Making a bonbonniere
We do bonbonniere
 Making a bonbo nierku
The side walls must be glued with white Whatman paper so that the grayness of the cardboard is not enlightened through the light fabric. The spatula will help create a smooth surface. It is important that the layer of PVA glue be as thin as possible during the whole work on the product!
 Making a bonbonniere
 Making a bonbonniere

Making a bonbonniere
 affairs it bonbonniere
Cut a strip of fabric of length 45 cm and height about 7 cm. and neat glue Proutyuzhivaem each side using PVA. Make sure there are no bubbles. By sticking each side, we draw a joint or spatula along it.
 Making a bonbonniere
 Making a bonbonniere
Making a bonbonniere
Making a bonbonniere
 Making a bonbonniere
Making a bonbonniere
 Making a bonbonniere
Cutting corners at an angle of 45, leaving a few millimeters of fabric from the corner of the product. We glue the remaining fabric to the bottom.
 Making a bonbonniere
 Making a bonbonniere
 Making a bonbonniere
 Making a bonbonniere
 Making a bonbonniere
The same is done with the top.
 Making a bonbonniere
Making a bonbonniere
 Making a bonbonniere
 Making a bonbonniere
to seal the bottom of the previously prepared piece,suitable in size.
Making a bonbonniere
 Making a bonbonniere
 Making a bonbonniere
 Making a bonbonniere
D We wish a bonbonniere
 Making a bonbonniere
 Making a bonbonniere
Making a bonbonniere
Making a bonbonniere
Prepare parts and paste them in the inner part of the product.
Making a bonbonniere
 Making a bonbonniere
 Making a bonbonniere
 Making a bonbonniere
Making a bonbonniere
 Making a bonbonniere
 Making a bonbonniere
 Making a bonbonniere
The main part is ready. Make a bonbonniere cover.
 Making a bonbonniere
Let's draw diagonals and mark 3 cm symmetrically in the middle. Make a cut with a stationery knife about 1.5 mm wide. This is the bottom of the cover.
 We make a bonbonniere
To the upper part we glue a synthetic winterizer on the PVA and make a slot.
 Making a bonbonniere

Making a bonbonniere
It is important to follow the instructions in the figures, pressing down the lid when we glue the edges. Make sure that the fabric does not move.
 Making a bonbonniere
 Making a bonbonniere
 Making a bonbonniere
Prepare for the handle two strips of drawing paper (length = 10 cm, width = 2.9 cm) and fabric (length = 10 cm, width = 4 cm). We glue them together in an appropriate way and pass them through the hole. We cut off the long ends on the reverse side and glue them in different directions.
 Making a bonbonniere
 Making a bonbonniere
 Making a bonbonniere
Making a bonbonniere
 Making a bonbonniere

Prepare the inside of the lid. Glue the drawing paper and fabric of the desired size on the outer part of it. We fix the finished part with the “Moment Crystal” glue to the inside of the cover, fixing it well.
 Making a bonbonniere
 Making a bonbonniere
 Making a bonbonniere
Bonbonniere is ready to store various trifles!
 Making a bonbonniere
Making a bonbonniere


Related News


Origami Jedi Yoda Do It Yourself
Complicated postcards by March 8
Loctite 5910
Amplifier on TDA7496SA
Do I need to work 2 weeks
All the details of the technical characteristics of a chainsaw
Blinds: What Causes Popularity