Original and stylish beads
Hello, dear needlewomen! Today I'm offering you a master class on making such original and stylish beads. In my case they are made in amber-turquoise. You can choose those beads and those colors that you like the most. Let's get started.We need: • pliers • • side cutters • round-nose pliers • pins with eyelets at the end • a chain with large links • carbine • jewelry rings for fastening with a diameter of 0.5 cm • amber glass beads • large curly beads of turquoise colorWe put small glass beads on the pin and bend it with our hands.Take side cutters and cut off the pin,leaving approximately 1 cm.Now we need to make the exact same loop on the second end of the bead. To do this, grab the tip of the pin with round pliers and bend it in the opposite direction. For example, if you are bending the pin to the left with your hands, then now with round pliers you need to bend it to the right. It turns out a beautiful eyelet.Let's do the same thing with all the glass beads that we plan to use in our work. These are the cheburashki we get.Remember that at this stage it is not necessary to close our loops, leave them ajar, we will close them a little later. Next, we thread pins into our main beads and make ringlets in the same way. Rings do not close. We show imagination, we try a different combination of figured beads. I chose this combination for my beads.Now we need to assemble the separate beads into a single whole. For me, this stage is the most interesting, becauseNow we see how our product will turn out. If you decide to change the combination of beads, do it now, before it is too late. So, with the help of the eyelets that we prudently left ajar, we can easily assemble the product. All loops are tightly closed with round pliers.With the help of a connecting ring we attach a bead, which we emphasize. I have this diamond-shaped bead, the same color as the main shaped beads. You can highlight it in a different color if desired. We thread the connecting ring into the ears of two amber beads and a diamond-shaped bead. Ring tightly close.We measure 3 segments of the chain. They do not have to be the same. On the contrary, let their length be slightly different. I have chains of 6-7 cm in length. We are passing the connecting ring to the extreme links of the chains, we are not closing the ring yet.We pass through Our ring with strung chains in the free tab of a diamond-shaped bead.Ring tightly close.We measure another 2 segments of the chain. Now they are desirable to make the same. I have 8 cm lengths.With the help of connecting rings we attach chains to the extreme amber beads.We just need to attach a fastener. I chose a carbine. Fasten it with a connecting ring to the extreme link of one of the chains.The links of my chain are wide enough, so I can attach a carabiner to any of them, adjusting the length of the product.Our beads are ready!
Wedding Dress Models
A large table of plastic pipes
Varieties of outdoor clothes hangers
Christmas dough from salt dough
Little Princess Hair Clip