Powerful penetrating lubricant
The penetrating lubricant, which is being discussed, is many times greater than the most common WD-40 tool that everyone so likes to use when unscrewing old, rusted bolts and nuts. Very often, when you try to unscrew the rusty threaded connection, we suffer a failure and the bolt breaks. It's not so scary if it has free access and is easy to replace. But our life is not deprived of irony, and on an evil occasion the scrapping occurs in the most inaccessible place. Or a place where the pin breaks under the root and besides how to drill a hole there is no other way out. To avoid such cases, or to minimize this result, a personal lubricant was developed. Everything was learned by experience.Then add a dry lubricant.And rust converter.All is well mixed and poured into the sprayer.We test with a typewriter for friction.The result is that the machine shaft could not be braked with a load on the lever above 11 kg! Although the purchased WD-40 caused the shaft to stop already for 4 kg of the applied effort. Now we will test the self-made penetrating lubricant in real conditions. Clamp a rusty stud with a bolt in a vice. Spray the grease. The reaction will be immediately visible, as there is a rust converter in the composition that reacts to corrosion.And as a result, the nut is very easy to unscrew. The secret of this lubricant is simple:The rust converter eats away rust, white spirit promotes good penetration, and solid lubricant has a good lubricating effect. As a result, our goal has been achieved - the nut is turned off, the stud is intact. But this miracle has lubricants and its own drawbacks: it must be shaken every time before use. Just particles of dry lubricant can clog in the atomizer nozzle. Well, it is desirable to make such a composition in small quantities and only before use, since the properties after prolonged storage, in my opinion, are significantly lost.Then pour the solvent.
The first recipe for powerful penetrating lubricantThis option is great for heavily rusted parts. The composition is as follows:
- White spirit - 50 gr.
- Dry lubricant, such as Forum - 5 gr. Another is also suitable - graphite, molybdenum, and so on.
- A rust converter, such as Tsinkar, Tsinkor, etc.- 50 gr.
Manufacturing of penetrating lubricantPouring white spirit into the container.
The second recipe powerful penetrating grease with your own handsThe second composition is more stable and is designed to drastically reduce the friction in threaded assemblies during their unwinding. Composition:
- White spirit solvent, 646 - 50 g.
- Waterproof lubricant, graphite, Zelenka type - 5 g.
- Prolong additive additive - 10 gr.
Comparative test in real conditions with WD-40We will clamp a rusty bracket with nuts in a vice. Initially sprinkle the WD-40. Turn to grease into the thread. Next, take the torque wrench and measure the effort.
Decoupage Flower Kettle
Garlic bread in the oven
Shrink sleeves from plastic bottles
Cardboard Roll Snowman
Top Cutlery Brands
Stained glass painting with a bouquet of flowers
Paper LED Light