Rose Tree

Good afternoon. Not long ago I bought plastic bags under the garbage, it turned out that they come in different colors, not only in gray. So I thought that such multi-colored bags can be used not only for direct destination, but also you can make a beautiful decorative tree with roses. And how to do it, I will now show and tell. For this we need: - Wire (aluminum). - Nippers. - Newspaper - Glue pencil - Scissors - Painting, brush - Potty - Gypsum or cement - Polyethylene multicolored bags. br>And so, let's begin. We take the wire, with the help of the wire cutters we cut the required length, I obtained a length of 25 centimeters, such wire segments need 8 pieces. Then we take newspaper strips 2-3 cm wide, which I pre-cut and wrap a piece of wire, the tip is fixed with glue. Wire put on a strip at an angle of 45% degree.
 Tree with roses
 Tree with roses
Only the 4- 5 centimeters of wire do not need to be wrapped with a newspaper, then we will pour these ends with cement.We do this with all segments.
 Tree with roses
Add the segments together and fasten them with another segment. This will be the base of the tree.
 Tree with roses
 A tree with roses
Let's postpone the basis of our tree for a while, dissolve the solution gypsum or cement and pour it into the pot. Then we take a tree trunk and turn the wire in the place where the newspaper is not glued, it is necessary for the tree to sit firmly. Everything, we plant a tree.
 Tree with roses
 Tree with roses
 Tree with roses
When the solution in the pot hardens, you can spread the branches exactly as you need.
 Tree with roses
We need add small twigs, for this you need newspaper tubes. We take a strip, a spoke and reel a strip on the spoke, do not forget to glue the tip with glue.We take out the spoke and get a tube.  Tree with roses  Tree with roses Then we cut this tube into pieces of different length and glue them to large branches of the tree. You can stick it in two ways, you can just bend the twig, but you can make it so that you can not see the joint, take a newspaper strip 0.5 centimeters wide, and the length that is required and wind it on the joint, the tip is greased with glue. I confess honestly, and glued the first method and the second, the second method is better. Thus we glue all the little twigs. How many such twigs are needed? As much as you want, but the more such twigs, the more you will have the colors on the tree.
 Tree with roses
 Tree with roses
Everything, all the twigs in place, now we paint the tree brown. If necessary, then paint the second time.
 A tree with roses
While the paint is drying, take polyethylene multi-colored bags and cut off the top 5 centimeters wide.We take exactly the top of the bag because the polyethylene is double there and the roses will better keep their shape.
 Tree with roses
All these strips will go to flowers, except green . It will be leaves, but more on that later. We take one strip and cut out the petals for a future rose.
 A tree with roses
How to make a rose, I will show it on a skewer. We take a skewer, wind the first petal on it, and first we need to grease the lower edge of the petal with glue.
 Tree with roses
Take the second petal, the edge is also lubricated with glue and we put it overlap with the first one, then we straighten the edges of the second petal.
 A tree with roses
We do the same with all the petals. The more petals, the more magnificent your rose will be.
 A tree with roses
In the same way we make flowers on the branches of a tree.
Tree with roses
 Tree with roses
The flowers are glued, you can take a pot, we will make grass.Take a strip of green color 5 centimeters wide, fold it several times and make a fringe along the edge of the strip.
 Tree with roses
 Tree with roses
Tree with roses
Now turn the strip into a tube. We get a grass that we “plant” in a pot, fill the whole space in a pot with grass.
 Tree with roses
 Tree with roses
Tree with roses
If you wish, you can decorate a pot, for example, putas.
Tree with Name
Here's what we did.
A tree with roses
The tree is almost ready, but there are not enough green leaves on the twigs. Again we take green polyethylene and cut squares of 4x4 centimeters from it and fold them in this way.
 Tree with roses
 Tree with roses
 Tree with roses
 Tree with roses
We grease the corner of the leaf with glue and glue it to the twigs. The remaining leaves are folded in the same way. We glue them in a chaotic manner. After the glue dries, you need a little flatten leaves. Our decorative tree with roses is ready.

Related News


Recipe for lush pancakes on kefir
Heart-shaped photo frames
Natural Freshener
Denim Gloves
Earth Day drawing: master class with step-by-step photo
Baked Apple Homemade Marshmallow