Submersible pump from the pump of a washing machine

If you have an old or broken automatic washing machine in place, but you can get a good and very necessary thing from it - a water pump (pump). It is supposedly worth it at the very bottom under the drum and serves to pump the liquid from the washing tank into the sewage system. This pump works directly from a variable network of 220 V 50 Hz, its power is about 30 W. I will try to use it for watering and make it a submersible pump. Of course, the pressure of such a pump is not enough to pump water from the bottom of a well or a well, but from the bottom of a barrel or a larger ground reservoir is even enough. The pump actually consists of two parts: an electromagnetic coil with a U-shaped core and a tight seal the pump itself with the impeller and the motor core.

Making a submersible pump from a pump

So, it is necessary to detach the coil from the body of the pump, it becomes simpleextension.
The submersible pump from the pump of the washing machine
Also on the coil you can see a thermal fuse that triggers when the temperature rises, so as not to burn the winding. Solder the power cord of the required length, always double isolation. In the frame of the coil made propyl under this wire.
Submersible pump from the pump of the washing machine
From thick paper make the frame under the coil. It will be filled with epoxy resin, which will seal the electrical parts.
Submersible pump from the pump of the washing machine
Dilute and pour the epoxy resin. This must be done on any substrate, so that you can then tear it off.
Submersible pump from the pump of the washing machine
But before you directly fill it is necessary to glue all the gaps with hot glue. So that the resin does not spill out and flow out.
Submersible pump from the pump washing machine
We are waiting 24 hours until everything hardens.Then we assemble by putting on the pump with the impeller.
Submersible pump from the pump of the washing machine
Submersible pump from the pump of the washing machine
And then the inlet.
Submersible pump from the pump of the washing machine

We are testing

I took a bucket of water for testing. I put the submersible pump in there now and turned it on.
Submersible pump from the pump of the washing machine
Submersible pump from the pump of the washing machine
Submersible pump from the pump of the washing machine
Submersible pump from the pump of a washing machine
Of course there is no special pressure, but as I said, it’s enough for the barrel to pour all the beds at any height without unnecessary trouble. The pump is very good. Bucket pumped out in a few seconds.
Submersible pump from the pump of the washing machine
I want to draw your attention that this homemade product is shown purely for your reference. If you do something similar, it is only at your own peril and risk.A voltage of 220 V is life threatening and if something suddenly strikes, such an error can become fatal.


Related News


Oatmeal Fritters
Silvery summer suit - openwork top and skirt of a hook
Cap connected by scales
How beautiful to smile
Painting a laptop in a staggered style
How to physically raise children
How not to get swine flu during an epidemic
How to draw a dolphin